Select the installation location for the toilet. The installation location should be close to the water and sewer lines
Mark the location of the toilet mounting bracket on the wall. The toilet installation instructions will provide the exact location of the mounting bracket.
Use a drill to create holes in the wall at the marked location. The holes should be large enough to accommodate the mounting bracket screws.
Insert the mounting bracket screws and nuts into the holes. Tighten the screws with a wrench.
Place the toilet mounting bracket on the screws. The mounting bracket should be firmly attached to the wall.
Place the wall-mounted toilet on the mounting bracket. The toilet should be firmly attached to the base.
Connect the water lines to the toilet. Use PTFE tape to prevent water leaks.
Connect the siphon to the toilet. The siphon should be firmly connected to the toilet.
Test the toilet with water. Make sure the water is draining properly.
Install the back plate of the toilet. Use toilet adhesive to attach the back plate to the wall
